How to lubricate the impact crusher? Time：2017-06-29 10:22:31

Impact crusher is a new type of crushing equipment, suitable for crushing brittle, medium hard, less water content of various materials. In the building materials, metallurgy, chemical industry, thermal power industry, mainly used for crushing coal, coal gangue, sandstone, shale, limestone, gypsum and other minerals. The Impact crusher with stable operation, reliable, long life, compact structure, less dust, low noise, high ability to crush hard materials and other characteristics. To make the equipment better and more effective work, usually conservation is very important, especially the lubrication of the equipment. 

1. In the course of use, the crusher should always pay attention to and check the friction surface of the lubrication work.
2. The lubricating oil used should be based on crushing equipment using different locations, temperature, season and other conditions to use different lubricants, the crusher equipment to quantify the lubrication work.
3. Require the lubricant to the seal of the adaptability is better, so as not to damage the seal.
4. After eight hours of work to the bearing after filling the oil once every three months to change the grease once. Crusher in the oil, the application of clean gasoline or kerosene carefully clean the bearings, grease into the bearing seat for the volume of 50%.