Pay attentions to these matters when using cone crusher Time：2017-06-28 17:19:32

As a new cone crusher crushing equipment, performance advantage is mainly reflected in three aspects of feed size, processing power and discharging granularity, how it has remained efficient cone crusher has become a primary issue that plagues many users, now Zhongxin will introduce you simple precautions for use.

1. It should be checked prior to cone crusher boot, before starting to run properly after confirmation.
2. When you start the main motor, should be followed by co-isolation switch, oil switch. You should shut down sequentially oil switch, isolation switch, when the host is still running non-operating power is disconnected.
3. Host-initiated preceded start lubrication station, lubrication station stopped after the host to stop. The host can start operating normally after the feed, the feed can be shut down to stop and completely empty.
4. When cone crusher is running, the hydraulic oil equipment should meet the requirements specified.
5. The particle size of the crushed material shall comply with the product specification requirements. Feed must be approved by the dispensing tray, which can not be higher than the feed rate of the horizontal rolling acetabular wall.
6. Operating current, the power shall not exceed 85% of the rated current, power.
7. It should be checked regularly, maintenance and repair of equipment.
8. When the crusher is running, you should check the locking system of pressure and fluid Kui station operating conditions, oil spills and inadequate locking force found the problem, we should stop to check repairs.